SpeedStream PPPoE Modem
10
Windows NT 4.0
1. On the Windows taskbar, click Start, then
point to Settings, and then click Control
Panel.
The Windows Control Panel displays.
2. In Control Panel, double-click Network.
The Network dialog box displays.
3. On the Protocols tab, select TCP/IP
Protocol, and then click Properties.
The Microsoft TCP/IP Properties dialog box
displays.
4. In the Microsoft TCP/IP Properties dialog
box, make sure that the correct network
adapter is selected in the Adapter menu and
that Obtain an IP address from a DHCP
server is selected; then click OK.
Note
Your network adapter may differ from
this illustration.
To Next Page
Loading...
Need help?
General