TOTAL GYM
®
POWER TOWER
T
M
OWNER’S GUIDE
OWNER’S GUIDE TOTAL GYM
®
POWER TOWER
TM
800 541 4900 EFISPORTSMEDICINE.COM
7
NOTE: Letters in (parentheses) refer to the PARTS IDENTIFIER on page 2 and/or the PARTS ASSEMBLY on page 3. Use as needed for clarification.
PARTS ASSEMBLY
PUTTING YOUR POWER TOWER
TM
INTO OPERATION IS EASY.
1.
To begin assembly, remove your
PowerTower
TM
from the box. Stand the PowerTower upright.
Find Hardware Packet (see page 3 for Hardware Packet Contents).
2. Pull and twist the retractable Support Strut Knob (M) to loosen it.
POWER TOWER SET-UP
3. While unfolding the PowerTower, as an extra precaution, hold the side of the Tower (A)
with one hand to steady the Tower (A).
4. With the other hand, push the Lower Rails (K) off and away from the Tower Base (P)
by grasping the padded Center Rail Crossbar (W)and allow the Rails (K, X) to unfold
slowly away from the Tower (A) until the Rails (K, X) are fully extended.
CAUTION: Do not touch the hinge.
1
2
3
4
To Next Page
Loading...
Need help?
General