EFT E416P - Page 6

EFT agriculture frame installation manual
© 2020 Hefei EFT all rights reserved
5
Pic4
Pic6
3. Turn the body over.
Pic7
Pic8
4. Remove the M3*10 self-tapping screws of
the protection plate of the power distribution
board.
Pic5
7. Align the holder with the power plug.
8. Use M3*8 screws to fix the C-type pipe
clamp.
Pic3
5. Pass the AS150U power cord through the
three-hole protective coil.
6. Install the AS150U fixed seat