EasyManuals Logo

EGO Flash User Manual

Default Icon
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Incoming call
If the mobile phone is available over the Bluetooth
®
connection, the call is signaled with the ringtone on your mobile phone. Other-
wise a signaling tone is generated by the EGO FLASH.
If the caller has not blocked display of his phone number, and if the mobile phone supports this function, the display of the con-
trol unit will show the callers number or, if a corresponding entry is found in the contacts list, the callers name. You can decide
whether to take the call (green key or key) or reject it (red key or key). If you accept the call, you can adjust the volume
with the , keys. The settings are saved. You can end the call by pressing the key.
Call setup
Call setup from the EGO FLASH is only possible if there is an existing Bluetooth
®
connection between the EGO FLASH and the mo-
bile phone. You may set up a call with voice-activated dialing or through the menu.
To activate voice-activated dialing, press the key for longer than half a second. With the “Dial number” command, you may
announce the number to be dialed, and with the “Dial <name>” command, a name from the contacts list can be dialed directly. For
more details, please see the section “Voice control”.
The following methods may be used to initiate a call from the menu:
by selecting from the contacts list and the mobile phone
by direct outward dialing of a number with the number speller
dialing from the call list on your mobile phone
through the call-back feature for received SMS messages.
And lastly, you may also dial a number directly on your mobile phone.
Starting the voice dialing of the telephone
The telephone‘s own voice dialing, if present, can be started by holding down the red button This can be ended again by pressing
the red button again.
IMPORTANT NOTE: Please observe your country’s regulations on in-car telephone use!
Call ended
Once a call is ended, the menu jumps back to the main menu. If an incoming call is rejected with the key, the menu jumps to
the previous menu.
Setting the volume
The replay volume may be adjusted during a call and during active voice recognition with the , keys.
EGO FLASH

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO Flash and is the answer not in the manual?

EGO Flash Specifications

General IconGeneral
BrandEGO
ModelFlash
CategoryAutomobile Accessories
LanguageEnglish