HEDGE TRIMMER ATTACHMENT—HTA200016
End Cap
Protects shaft from intrusion of dirt and debris when not in use.
Soft Sleeve
For comfort and control.
Dual-head Wrench
Lock/unlocks the hex head lubrication bolt.
Tip protector (Optional, SOLD SEPARATELY)
Protects the outer end of the blade. It is sold separately. If there is a need, please visit
the website egopowerplus.com. Model Number: ATP2000.
Blade
Hardened steel blades for cutting hedges and shrubs.
Blade Guard
Safeguards against contact with the sharp blades when the tool is not in use. Protects
the blades from damage when the tool is in transportation and storage.
Release Trigger/Adjusting Lever/Locking Plate
Adjusts the hedge trimmer blade to the desired working position.
ASSEMBLY
WARNING!
If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING!
Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possibly serious personal injury.
WARNING!
Never attach or adjust any attachment while the power head is
running or with the battery installed. Failure to stop the motor and remove the battery
may cause serious personal injury.
To Next Page
Loading...
Need help?
General
