HEDGE TRIMMER ATTACHMENT—HTA2000 17
UNPACKING
◾
This product requires assembly.
◾
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
◾
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
◾
If any parts are damaged or missing, please return the product to the place of
purchase.
ADJUSTING THE BLADE
When the hedge trimmer is removed from the package, it is folded in its storage
position with the blade against the shaft (Fig. 2). Adjust the blade to a suitable working
position before attaching it to the power head.
There are 12 possible working positions
(Fig. 3). The angle of the blade can be
adjusted upwards to any of 5 positions,
from 0 (straight) to 45, and downwards
to any of 7 positions, from 0 to 90 (right
angle facing down).
2
45˚
135˚
3
To Next Page
Loading...
Need help?
General
