12
Slide the Alarm head onto the base. Connect the mains
power to the alarm circuit.
Wait 10 seconds and check that the green led on the
Alarm cover is on indicating that mains power is present.
If the blue light flashes every 10
seconds, remove the alarm and
manually depress the rechargeable
cell “on” switch as shown and refit
the alarm. If there is still a problem
the cells may be depleted so leave
the unit on mains power for 2 hours
to charge and test again.
Press and hold the test button. The red led will flash and
the horn will sound.
Repeat this installation procedure for all RadioLINK
bases in the system.
To Next Page
Loading...
Need help?
General
