Use a lint free cloth to wipe the surfaces.
and
maintenance:
Visual inspection for cleanliness of the components. Functional
testing according to the user manual. If necessary, perform
reprocessing process again until the components are visibly
clean.
Before packaging, make sure that the components have been
maintained according to the manufacturer’s instruction.
Storage of the processed device in a dry, clean and dust free
environment at modest temperatures, refer to label and
instructions for use.
Before first use and after each use, clean and disinfect the above components.
Do not use anything except Ethanol for Disinfection (Ethanol 70 to 80 vol%).
Do not use too much ethanol as it’s going into machine and damage the
components inside.
Do not allow any moisture to get into the device.
Page 40 / 51
To Next Page
Loading...