4. Product Installing
Page 19 / 66
4.7 Sensor Protection
When the sensor is not in use, it can be wrapped with a silicone protective
cover, which has reduced scratches or wears on the sensor receiving board. The
sensor silicone protective cover is used as follows:
1. Prepare the sensor and the
silicone protective cover
2. Gently put the silicone
protective cover on the sensor
receiving board
4.8 Use of Handheld Bracket
When using the Intraoral Digital Imaging Sensor system for intraoral imaging,
it is recommended to use the sensor with the handheld bracket. The handheld
bracket has 2 types for each model, A and B.
The use of handheld bracket A:
1. Prepare the sensor and the
handheld bracket A.
To Next Page
Loading...
