4.1 KNOW YOUR EQUIPMENT.
Do not operate this machine unless you have read the operations and maintenance manual
carefully. Read any additional instructions included from other manufacturers and organizations
such as Honda® and the Masonry and Concrete Saw Manufacturers Institute. Learn the
applications and limitations as well as the specific potential hazards related to this tool.
4.2 RECEIVE PROPER TRAINING.
Do not operate this machine unless you have received operational and maintenance training from a
U.S. SAWS representative or from an authorized distributor for U.S. SAWS.
4.3 PROTECT YOUR FEET.
Observe all applicable local, state and federal safety regulations. Wear OSHA approved foot
protection.
4.4 PROTECT YOUR EYES.
Observe all applicable local, state and federal safety regulations. Wear OSHA approved safety
glasses.
4.5 PROTECT YOUR LUNGS.
Breathable silica may be generated by use of this product. Silica can cause severe and permanent
lung damage, cancer, and other serious diseases. Do not breath the dust. Do not rely on your sight or
smell to determine if the dust is in the air. Silica may be in the air without a visible dust cloud. If air
monitoring equipment for silica is not provided by your employer at your worksite, you MUST wear
appropriate respiratory protection when using or servicing the machine. Consult your employer
and OSHA regarding the appropriate respiratory protection.
To Next Page
Loading...
Need help?
General
