To Next PageTo Next Page
Need help?Do you have a question about the EINHELL JS SERIES and is the answer not in the manual?
General| Type | Jigsaw |
|---|---|
| Variable Speed | Yes |
| Stroke Rate | Varies depending on the model |
| Bevel Cut | Yes |
| Pendulum Action | 4-stage |
| Blade Change | Tool-less |
Understand the machine, its applications, limitations, and related hazards.
Obtain operational and maintenance training from authorized sources.
Wear appropriate PPE for feet, eyes, and lungs to prevent injury.
Observe safety regulations and wear OSHA-approved hearing protection.
Avoid carbon monoxide exposure and flammable materials.
Ensure children and visitors remain clear of the work area.
Follow procedures for shutting down the engine and refueling safely.
Verify blade rotation direction and check for damage or misalignment.
Use blades rated at or above the machine's maximum speed.
Obtain MSDS for work surface materials due to potential hazards.
Operate with full attention and common sense; avoid operating when tired.
Verify guards and parts are in good condition; repair or replace damaged items.
Do not touch moving parts such as blades, belts, or others.
Stop the machine immediately if any abnormalities are observed.
Do not modify or disable the deadman lever; it is critical for safety.
Read all relevant manuals and familiarize yourself with machine parts.
Verify engine condition and assess work environment for hazards.
Obtain MSDS for materials to be cut; be aware of dust hazards.
Select the correct blade and install it properly, inspecting for damage.
Verify deadman lever, guards, and bolts are in place and functional.
Ensure the blade guard is properly secured.
Check belt tension and set the blade depth using the adjustment handle.
Align the blade and pointer wheels with the intended cut line.
Adjust dust brush height and caster wheel for optimal dust collection.
Verify belt and blade guards are in place and all bolts are tight.
Dress properly and wear necessary protective gear for hazards.
Follow the correct steps for starting the Honda engine.
Engage and test the deadman lever for proper function.
Lower the blade and move the machine forward in a straight line.
Raise the blade, stop the engine, and turn off the fuel valve.
Release the deadman lever immediately in an emergency situation.
Diagrams illustrating the JS Series Saws components.
Detailed list of parts for the jack assembly.
List of available JS premium dry cut diamond blades.
Procedures for removing and installing saw blades.
Adjust dust brush height and caster wheel for optimal dust collection.
Check belt tension and lubricate bearings as per schedule.
Refer to Honda Owner's Manual for engine maintenance details.
Guidance for diagnosing and resolving common issues.
Information on warranty policies, exclusions, and limitations.
Instructions and form for registering the product warranty.
Form for updating ownership or address for warranty records.
