EINHELL TC-EW 160 D User Manual

GB
- 15 -
Danger! - An electric shock from the welding electrode can be fatal
Danger! - The inhaling of welding fumes can harm your health
Danger! - Welding arc radiation can damage your eyes and injure your skin
Danger! - Welding sparks can cause an explosion or fi re
Danger! - Electromagnetic fi elds can disturb the operation of pacemakers
Danger! Danger from electric shock
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear special welders‘ gloves. Hot glowing particles may fl y about while you are welding.
You should therefore wear special welding gloves to protect your hands and arms.
Anl_TC_EW_160_D_SPK9.indb 15Anl_TC_EW_160_D_SPK9.indb 15 26.07.2017 09:01:0026.07.2017 09:01:00

EINHELL TC-EW 160 D Specifications

General

Fuse	16 A
No-load voltage	48 V
AC input voltage	230/400 V
AC input frequency	50 Hz
Welding processes	-
Maximum welding current	160 A
Minimum welding current	55 A
Variable welding current	Yes
Maximum electrode diameter	4 mm
Minimum electrode diameter	1.6 mm

Weight and Dimensions

Depth	480 mm
Width	280 mm
Height	356 mm
Weight	20450 g