EINHELL TC-EW 160 D User Manual

GB
- 22 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Electrode holder, mass tongs
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
In the e ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_EW_160_D_SPK9.indb 22Anl_TC_EW_160_D_SPK9.indb 22 26.07.2017 09:01:0126.07.2017 09:01:01

EINHELL TC-EW 160 D Specifications

General

Fuse	16 A
No-load voltage	48 V
AC input voltage	230/400 V
AC input frequency	50 Hz
Welding processes	-
Maximum welding current	160 A
Minimum welding current	55 A
Variable welding current	Yes
Maximum electrode diameter	4 mm
Minimum electrode diameter	1.6 mm

Weight and Dimensions

Depth	480 mm
Width	280 mm
Height	356 mm
Weight	20450 g