EINHELL TC-PP 220 User Manual

GB
- 17 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Clamp
Consumables* Grinding pins
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_PP_220_SPK9.indb 17Anl_TC_PP_220_SPK9.indb 17 15.05.2019 15:05:3315.05.2019 15:05:33

EINHELL TC-PP 220 Specifications

General

Maximum airflow	128 l/min
Idle speed (max)	22000 RPM
Working pressure (max)	6.3 bar
Carrying case	Yes
Product type	Straight die grinder
Product color	Black, Red
Adjustable speed	-
Power source	Compressed air

Weight and Dimensions

Weight	610 g
Package depth	68 mm
Package width	228 mm
Package height	278 mm
Package weight	1480 g