EINHELL TC-SM 2531 U User Manual

GB
- 31 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_SM_2531_U_SPK7.indb 31 21.08.15 08:20

EINHELL TC-SM 2531 U Specifications

General

Input power	1800 W
Power source	AC
Blade bore	30 mm
Blade diameter	254 mm
Idle speed (max)	4800 RPM
Dust extraction	Yes

Weight and Dimensions

Depth	790 mm
Width	460 mm
Height	422 mm
Weight	21200 g