EINHELL TC-TS 200 User Manual

Anl_TC_TS_200_SPK9.indb 31 13.11.2019 12:55:58
GB
F or EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste
and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical
equipment must make sure that the equipment is properly disposed of if he no longer wants to keep
the equipment. The old equipment can be returned to a suitable collection point that will dispose of
the equipment in accordance with the national recycling and waste disposal regulations. This does
not apply to any accessories or aids without electrical components supplied with the old equipment.
T he reprinting or reproduction by any other means, in whole or in part, of documentation and
papers accompanying products is permitted only with the express consent of the iSC GmbH. S
ubject to technical changes
- 27 -

EINHELL TC-TS 200 Specifications

General

Input power	800 W
AC input voltage	230-240 V
AC input frequency	50 Hz
Idle speed	2950 RPM
Cutting depth (45º)	27 mm
Cutting depth (90º)	45 mm
Number of teeth	24
Saw blade included	-
Package depth	510 mm
Package width	540 mm
Package height	360 mm
Package weight	13600 g
Product color	Black, Red, Stainless steel

Weight and Dimensions

Weight	11000 g
Table depth	373 mm
Table width	505 mm
Bore diameter	16 mm
Blade diameter	200 mm