EINHELL TC-TS 2025/2 U Original Operating Instructions

GB
- 24 -
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Risk of injury! Do not reach into the running saw blade.
Anl_TC_TS_2025_2_U_SPK9.indb 24Anl_TC_TS_2025_2_U_SPK9.indb 24 26.09.2019 10:55:5126.09.2019 10:55:51

EINHELL TC-TS 2025/2 U Specifications

General

Idle speed	5000 RPM
Cutting height @ 45°	65 mm
Cutting height @ 90°	85 mm
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Placement supported	Freestanding
Number of teeth	24

Weight and Dimensions

Table depth	583 mm
Table width	563 mm
Blade diameter	250 mm