EINHELL TC-TS 2225 U User Manual

GB
- 86 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old
electric and electronic equipment and its implementation in national
laws, old electric power tools have to be separated from other was-
te and disposed of in an environment-friendly fashion, e.g. by taking
to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer,
the owner of the electrical equipment must make sure that the
equipment is properly disposed of if he no longer wants to keep the
equipment. The old equipment can be returned to a suitable coll-
ection point that will dispose of the equipment in accordance with
the national recycling and waste disposal regulations. This does
not apply to any accessories or aids without electrical components
supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in
part, of documentation and papers accompanying products is per-
mitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TC_TS_2225_U_SPK7_Rewe.indb 86 24.03.2020 10:29:27

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm