EINHELL TE-TC 620 U User Manual

GB
- 15 -
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Danger! Risk of injury through cutting
Caution! Segmented diamond cutting wheels must not be used
Anl_TE_TC_620_U_SPK7.indb 15Anl_TE_TC_620_U_SPK7.indb 15 24.05.2017 13:49:2124.05.2017 13:49:21

EINHELL TE-TC 620 U Specifications

General

Bore size	- mm
Idle speed	3000 RPM
Diamond disc	Yes
Maximum power	900 W
Blade diameter	200 mm
Cutting length	620 mm
AC input voltage	230 V
AC input frequency	50 Hz
Cutting height @ 45°	25 mm
Cutting height @ 90°	30 mm
Cutting disc swivel angle	45 °
Continuous operating time @ maximum power	30 min

Weight and Dimensions

Depth	1013 mm
Width	455 mm
Height	460 mm
Weight	34400 g
Table depth	325 mm
Table width	610 mm
Package weight	38600 g