EINHELL TE-TC 620 U User Manual

GB
- 20 -
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
10. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
Anl_TE_TC_620_U_SPK7.indb 20Anl_TE_TC_620_U_SPK7.indb 20 24.05.2017 13:49:2124.05.2017 13:49:21

EINHELL TE-TC 620 U Specifications

General

Bore size	- mm
Idle speed	3000 RPM
Diamond disc	Yes
Maximum power	900 W
Blade diameter	200 mm
Cutting length	620 mm
AC input voltage	230 V
AC input frequency	50 Hz
Cutting height @ 45°	25 mm
Cutting height @ 90°	30 mm
Cutting disc swivel angle	45 °
Continuous operating time @ maximum power	30 min

Weight and Dimensions

Depth	1013 mm
Width	455 mm
Height	460 mm
Weight	34400 g
Table depth	325 mm
Table width	610 mm
Package weight	38600 g