EINHELL TE-TC 620 U User Manual

GB
- 21 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TE_TC_620_U_SPK7.indb 21Anl_TE_TC_620_U_SPK7.indb 21 24.05.2017 13:49:2124.05.2017 13:49:21

EINHELL TE-TC 620 U Specifications

General

Bore size	- mm
Idle speed	3000 RPM
Diamond disc	Yes
Maximum power	900 W
Blade diameter	200 mm
Cutting length	620 mm
AC input voltage	230 V
AC input frequency	50 Hz
Cutting height @ 45°	25 mm
Cutting height @ 90°	30 mm
Cutting disc swivel angle	45 °
Continuous operating time @ maximum power	30 min

Weight and Dimensions

Depth	1013 mm
Width	455 mm
Height	460 mm
Weight	34400 g
Table depth	325 mm
Table width	610 mm
Package weight	38600 g