Need help?Do you have a question about the EINHELL TE-TC 620 U and is the answer not in the manual?
General| Bore size | - mm |
|---|---|
| Idle speed | 3000 RPM |
| Diamond disc | Yes |
| Maximum power | 900 W |
| Blade diameter | 200 mm |
| Cutting length | 620 mm |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Cutting height @ 45° | 25 mm |
| Cutting height @ 90° | 30 mm |
| Cutting disc swivel angle | 45 ° |
| Continuous operating time @ maximum power | 30 min |
Weight and Dimensions| Depth | 1013 mm |
|---|---|
| Width | 455 mm |
| Height | 460 mm |
| Weight | 34400 g |
| Table depth | 325 mm |
| Table width | 610 mm |
| Package weight | 38600 g |
To Next Page