3. Screen Adjustment and Settings
17
Adjustment Contents
Menu Function Descriptions Adjustable range
Brightness To set the brightness of the screen 0~100%
Tips
• The values shown in the “%” are available only as reference.
Temperature To set the color temperature 4000K~10000K
in 500 K increments (including 9300 K)
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted, <Gain> is adjusted automatically according to the
color temperature.
• Setting the temperature under 4000 K or over 10000 K invalidates the color
temperature setting. (The color temperature's setting turns "OFF".)
• Setting the <Gain> invalidates the <Temperature> adjustment.
Gamma To set the gamma value 1.8~2.6
Saturation To change the saturation -100~100
Setting the minimum level (-100) turns the
image to the monochrome.
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
Hue To change the flesh color, etc. -100~100
NOTE
• Using <Hue> adjustment may not obtain proper tone reproduction.
Gain To change each color
(red, green and blue)
0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
Tips
• The values shown in the “%” are available only as reference.
• The <Temperature> setting invalidates this setting. The <Gain> setting varies with
color temperature.
6 colors To adjust <Saturation> and <Hue> in
each color (Red, Yellow, Green, Cyan,
Blue and Magenta)
Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset To reset the color settings of the selected FineContrast mode to the default settings.
To Next Page
Loading...
Need help?
General