Eizo ColorEdge CG301W

3. Screen Adjustment and Settings
19
3-4. Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined
amount of time has lapsed. This function was created to reduce Afterimage characteristics that are
particular to LCD monitors when the monitor screen is left on for a long period without use.
[Procedure]
1. Select <Off Timer> in the ScreenManager <Others> menu.
2. Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23
hours).
[Off Timer System]
PC Monitor Power Indicator
Operating time (1H - 23H) Operation Blue
Last 15 min. in operating time Advance Notice
*
1
Blue Flashing
Operating time expired Power Off Off
*1
When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension
of operation time can be set without limitation.
[Power Resumption Procedure]
Press to return a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no advance notice before
the monitor's power is turned off.
3-5. Locking the Settings
Use the "Adjustment Lock" function to prevent any accidental changes.
Buttons that can be locked
• (Enter button) / Adjustments/settings using Adjustment menu
•
-/$%
(Mode button)
• + Display setup (P.11)
Buttons that cannot be locked
• (Input Signal Selection button)
•
(Power button)
[How to lock]
1. Press to turn off the unit.
2. Press
again while pressing
-/$%
.
The screen is displayed with the adjustment lock.
[How to unlock]
1. Press to turn off the unit.
2. Press
again while pressing
-/$%
.
The screen is displayed with the adjustment lock released.