To Next PageTo Next PageHow to display images over the entire Eizo FlexScan EV2360-WT Monitor screen area?
If images are not displayed over the entire area of your Eizo monitor screen, try changing the “Picture Expansion” in the Setting menu.
How to fix Eizo FlexScan EV2360-WT when no picture and power indicator doesn't light up?
If your Eizo monitor isn't displaying a picture and the power indicator is off, try these steps: * Ensure the power cord is properly connected. * Turn on the main power switch located on the rear of the monitor. * Try turning the main power switch off, waiting a few minutes, and then turning it back on. * Increase the “Brightness”, “Contrast”, or “Gain” in the Setting menu. * Switch the input signal. * Turn “On” the “Compatibility Mode” in the “Administrator Settings” menu. * Move the mouse or press any key on the keyboard. * Verify that your PC is powered on. * Turn off the main power switch on the rear of the monitor and then turn it on again. * Use a recommended signal cable for the connection and cycle the monitor's power.
What to do if Eizo Monitor windows and icons are shifted after turning off/on?
If the positions of windows and icons are shifted when your Eizo monitor is turned off/on or when restored from power saving mode, try turning the setting “On” for “Compatibility Mode” on the “Administrator Settings” menu.
How to fix noise appearing on the Eizo FlexScan EV2360-WT screen?
If you notice noise on your Eizo monitor screen, try setting “Overdrive” to “Off” in the Setting menu. Also, when inputting HDCP system signals, normal images may not be displayed immediately.
How to resolve afterimages on Eizo FlexScan EV2360-WT Monitor?
To prevent afterimages on your Eizo monitor: * Avoid displaying the same image for extended periods. * Use a screen saver or power-saving function. * Change the image periodically or keep the power turned off for several hours.
How to fix blurred text on my Eizo FlexScan EV2360-WT Monitor?
If the text on your Eizo monitor appears blurred, ensure that your PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You can also try adjusting the “Sharpness” in the Setting menu.
What to do if my Eizo FlexScan EV2360-WT Monitor USB devices connected to the monitor do not work?
If USB devices connected to your Eizo monitor aren't working, try these troubleshooting steps: * Check that the USB cable is correctly connected between your PC and the monitor, and between the peripheral and the monitor. * Try different USB ports on both the monitor and the PC. * Reboot your PC. * If “Compatibility Mode” is set to “Off,” change it to “On.” * Update to the latest USB 3.1 Gen 1 driver provided by the manufacturer, or connect the monitor to the USB 2.0 port. * Check the PC’s BIOS setting for USB when using Windows.
Why I cannot select items in the Setting menu on Eizo FlexScan EV2360-WT?
Items that are displayed with gray text cannot be changed.
Why can't I access the Setting menu on my Eizo FlexScan EV2360-WT Monitor?
If the Setting menu does not appear on your Eizo monitor, check whether the switch operation lock function is active.
Why does the brightness change on my Eizo FlexScan EV2360-WT Monitor by itself?
If your Eizo monitor's brightness changes automatically, try setting the Auto EcoView setting to “Off.”
General