To Next PageTo Next PageWhat to do if my Eizo FlexScan EV2451-BK Monitor has no picture and the power indicator does not light up?
If your Eizo monitor shows no picture and the power indicator is off, ensure the power cord is properly connected. Then, turn on the main power switch located on the rear of the monitor. If the issue persists, turn the main power switch off, wait a few minutes, and then turn it back on.
What to do if the message appears on my Eizo FlexScan EV2451-BK?
If a message appears on your Eizo monitor, verify that your PC is powered on and that the signal cable is securely connected. Try switching the input signal. If the issue continues, turn off the main power switch on the rear of the monitor, and then turn it back on.
What to do if my Eizo FlexScan EV2451-BK Monitor power indicator is lighting orange?
If the power indicator on your Eizo monitor is orange, try switching the input signal. Also, move the mouse or press any key on the keyboard. Check to make sure your PC is turned on. If none of these steps work, turn the main power switch on the rear of the monitor off and then on again.
Why is text blurred on my Eizo Monitor?
If the text on your Eizo monitor appears blurred, check that your PC is configured to meet the monitor's resolution and vertical scan frequency requirements. You can also try adjusting the “Sharpness” in the Setting menu.
How to fix incorrect display position on my Eizo FlexScan EV2451-BK Monitor?
To correct an incorrect display position on your Eizo monitor, use the “Position” setting in the Setting menu to adjust the image position, specifically the “Hor. Position” and “Ver. Position”.
What to do if my Eizo FlexScan EV2451-BK Monitor power indicator is lighting white?
If the power indicator on your Eizo monitor is lighting white, increase the “Brightness”, “Contrast”, or “Gain” in the Setting menu.
How to fix afterimages appearing on my Eizo FlexScan EV2451-BK?
To address afterimages appearing on your Eizo monitor, avoid displaying the same image for extended periods. Utilize the screen saver or power saving function. To resolve existing afterimages, switch to a different image or power off the monitor for several hours.
What to do if vertical bars appear on the screen or a part of the image is flickering on my Eizo FlexScan EV2451-BK Monitor?
If vertical bars appear on the screen or part of the image is flickering on your Eizo monitor, use the “Clock” setting in the Setting menu to adjust it.
What to do if the whole screen is flickering or blurring on my Eizo Monitor?
If the entire screen of your Eizo monitor is flickering or blurring, use the “Phase” setting in the Setting menu to make adjustments.
What does it mean if my Eizo Monitor power indicator is flashing orange and white?
If the power indicator on your Eizo monitor is flashing orange and white, this can happen when the PC is connected to the DisplayPort connector. Use a signal cable recommended for the connection. Turn the monitor off and on. Also, check the connection and condition of the USB devices connected to the monitor. You can also try turning off the main power switch on the rear side of the monitor, and then turning it on again.
General