Eizo FlexScan EV2457 User Manual

Function Setting Value Description
Input Color Format Auto
YUV 4:2:2
*1
YUV 4:4:4
*1
YUV
*2
RGB
The color format of the input signal can be specied.
Try changing this setting if colors are not displayed correctly.
Note
• This setting is required when a DVI device is connected to
the monitor via the HDMI connector port using a DVI-HDMI
conversion connector.
• For DVI signal input, the setting is automatically set to
“RGB”.
Input Range Auto
Full
Limited
Depending on the PC, black and white of the video level of the
signal output to the monitor may be limited. If a limited signal is
displayed on the monitor, black will appear faint and white will
appear dull, leading to a reduction in contrast. The output range
of such signals can be extended to match the actual contrast
ratio of the monitor.
• “Auto”
Automatically identies the brightness range of the input
signal and displays the image accordingly.
• “Full”
Extension of the signal output range is not performed.
• “Limited”
Extends the signal output range through 0 to 255 and
displays the image.
Note
• For DVI signal input, the setting is automatically set to “Full”.
• When “YUV” is selected in “Input Color Format”, the setting
is automatically set to “Limited”. Additionally, when “Auto” is
selected and the monitor determines the input color format
to be YUV, the setting is automatically set to “Limited”.
Sound Source Stereo Mini Jack
DisplayPort
*2
HDMI
*3
For DisplayPort signal input and HDMI signal input, the sound
source can be changed.
Note
• For DVI signal input and HDMI (PC signal) input, the setting
is automatically set to “Stereo Mini Jack”.
*1 Only enabled during HDMI input
*2 Only valid for DisplayPort input
*3 Only valid for HDMI (video signal) input
22
Chapter 3 Advanced Adjustment / Setting

Eizo FlexScan EV2457 Specifications

General

Brand	Eizo
Model	FlexScan EV2457
Category	Monitor
Language	English