Eizo FlexScan EV2730Q User Manual

22
Chapter 3 Setting Monitor
3-8. Resetting the Monitor to the Default Settings
The setting values are reset to the default settings.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see “Main Default Settings” (page 41).
●
To reset the color adjustments
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Color Reset” in the “Color” menu, and press
.
3. Select “Yes” with
or .
4. Press
.
The color adjustments revert to the default settings.
●
To reset “EcoView Sense Settings”
This function resets adjustments for “EcoView Sense Settings” to the default settings.
Procedure
1. Press
.
2. Choose “EcoView Sense Settings” in the “EcoView Menu”, and press
.
3. Choose “Reset” in the “EcoView Sense Settings”, and press
.
4. Select “Yes” with
or .
5. Press
.
The “EcoView Sense Settings” adjustments revert to the default settings.
Note
• “EcoView Sense Settings” can be changed and reset only when “EcoView Sense” is set to “On” (see “4-4.
Setting the power saving mode when a person leaves the monitor” (page 25)).
●
To reset all adjustments to the default settings
This function resets all adjustments to the default settings.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Reset” in the “Monitor Settings” menu, and press
.
3. Select “Yes” with
or .
4. Press
.
All adjustments revert to the default settings.

Eizo FlexScan EV2730Q Specifications

General

Brand	Eizo
Model	FlexScan EV2730Q
Category	Monitor
Language	English