Eizo FlexScan EV2750 User Manual

- 29 -
Chapter 3
Advanced Adjustment/Setting
Function Setting Range Description Note
Power Save On
Off
The monitor can be set to enter power saving mode according to
the state of the PC.
The monitor changes to power saving mode about 15 seconds
after signal input ceases to be detected.
When the monitor has shifted to power saving mode, images are
not displayed on the screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power
saving mode and returns to the normal display mode.
• At the time of shifting to power saving mode, a
message that indicates the transition is displayed
5 seconds in advance.
• During PbyP display, the monitor only enters power
saving mode after both PCs have entered power
saving mode or have been switched off.
• When not using the monitor, you can turn off the
main power supply or disconnect the power plug so
that the power is cut completely.
• When the monitor is in power saving mode, devices
connected to the USB downstream port will still
work. Therefore, power consumption of the monitor
varies with connected devices even in power saving
mode.
• Power consumption varies even when the stereo
mini jack cable is connected.
Eco Timer Off
0, 1, 2, 3, 5, 10, 15,
20, 25, 30, 45 min,
1, 2, 3, 4, 5 h
The monitor can be turned off automatically after a specied
amount of time has passed in power saving mode.
Select the time to wait before turning off power to the monitor.
-
Power Indicator On
Off
The power indicator (white) can be turned off during screen
display.
-
Audio Selection (PbyP) Left Screen
Right Screen
Select the source of audio to output from the monitor during PbyP
display.
• “Left Screen”
Outputs the audio source from the left screen.
• “Right Screen”
Outputs the audio source from the right screen.
-
Monitor Reset - Restore all settings to their default values except for the following
settings.
• PbyP Picture Setup
• Settings on the “Administrator Settings” menu
• For details on default settings, see “Main Default
Settings” (page 51).

Eizo FlexScan EV2750 Specifications

General

3D	No
DDC/CI	Yes
Pixel pitch	0.233 x 0.233 mm
Aspect ratio	16:9
Screen shape	Flat
Display surface	Matt
Display diagonal	27 \
Display technology	LED
Viewable size, vertical	335.7 mm
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	596.7 mm
Digital vertical frequency	59 - 61 Hz
Digital horizontal frequency	31 - 89 kHz
Display brightness (typical)	350 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080), 2560 x 1440
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DVI-D ports quantity	1
Headphone connectivity	3.5 mm
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	2
RMS rated power	2 W
Certification	TCO Displays 7, TUV/E, TUV/GS, RCM, CE, CB, cTUVus, FCC-B, TUV/S, VCCI-B, RoHS, WEEE, CCC, EAC
Product color	White
Market positioning	-
Pivot angle	0 - 90 °
Tilt angle range	-5 - 35 °
Number of OSD languages	11
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	67 W
Annual energy consumption	39 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	22 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	EPEAT Gold, ENERGY STAR
Cables included	AC, DisplayPort, USB
Bundled software	EIZO ScreenManager Pro EIZO ScreenSlicer

Weight and Dimensions

Depth (with stand)	245 mm
Height (with stand)	545.2 mm
Weight (with stand)	7900 g
Depth (without stand)	48.5 mm
Width (without stand)	611.6 mm
Height (without stand)	359 mm
Weight (without stand)	5100 g