30
9 SPECIFICATIONS
9 SPECIFICATIONS
Electrical Specifications
CRT Dot Pitch 0.28 mm
CRT Size 39 cm (15 inch) class
90° deflection FS type
CRT Surface Anti-Reflective SuperErgoCoat
®
Scan Frequency
Horizontal: 27 kHz-70 kHz (Automatic)
Vertical: 50 Hz-120 Hz (Automatic)
Max. Active Display Area 280 mm (H) x 210 mm (V) (11.0" (H) x 8.2" (V))
(Viewable image size: 350 mm (13.7"))
* Display size can be set by the user through
microprocessor control panel.
* The actual size displayed can be dependent on the
graphics board or PC utilized.
Power Supply 100-120 VAC±10%, 50/60 Hz, 1.2 A
220-240 VAC±10%, 50 Hz, 0.6 A
Power Consumption
Normal: 82 W
Max.: 96 W (EIZO optional speaker attached: 99 W)
PowerManager Mode 1: Less than 10 W
PowerManager Mode 2: Less than 5 W
Input Connector Signal cable with D-Sub mini 15-pin connector
(permanently attached)
Recommended Resolution 1024 dots x 768 lines
Input Signal
Sync: • H/V Separate, TTL, Positive/Negative
• H/V Composite, TTL, Positive/Negative
• H/V Composite, Sync on Green 0.3 Vp-p, Negative
Video: • RGB Separate, Analog 0.7 Vp-p/75 Ohm, Positive
• RGB Separate, Analog plus Composite Sync on
Green
Mechanical Specifications
Dimensions 365 mm (W) x 375 mm (H) x 410 mm (D)
(14.4" (W) x 14.8" (H) x 16.1" (D))
Weight 14.5 kg (32.0 lbs)
Environmental Specifications
Temperature operating: 0°C to 40°C (32°F to 104°F )
storage: -20°C to 60°C (-4°F to 140°F )
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC range UL/CSA, FCC-B, DHHS, TÜV Rheinland/
Ergonomics Approved, TCO’95,
EPA ENERGY STAR
®
Program
220-240 VAC range CE, CB, TÜV Rheinland/GS,
TÜV Rheinland/Ergonomics Approved, TCO’95,
EPA ENERGY STAR
®
Program
To Next Page
Loading...
