18
Chapter 3 Advanced Adjustment/Setting
Function
Input Signal
(The setting range of each
function differs depending on the
input signal.)
√: Settable -: Not settable
Description
DisplayPort
DVI D-Sub
Clock - - √
Flickering of vertical lines on the screen or part of
the screen can be reduced.
Note
• Use the operation switches ( ) to
make ne adjustments so as not to miss any
adjustment points.
Phase - - √
Flickering and blurring over the entire screen can
be reduced.
Note
• Flickering and blurring may not be completely
eliminated depending on your PC or graphics
board.
• After setting, adjust the “Clock” again if vertical
bars appear.
Hor. Position
Ver. Position
- - √
The display position (horizontal and vertical) of the
screen can be adjusted.
Note
• Since the number of pixels and pixel positions
are xed on the LCD monitor, only one position
is provided to display images correctly. Position
adjustment is made to shift an image to the
correct position.
Sound Source √ - -
The audio source can be changed when receiving
DisplayPort signal input.
Setting Range: Stereo Mini Jack, DisplayPort
Note
• This setting is xed to “Stereo Mini Jack” when
receiving DVI signal input or D-Sub signal
input.
To Next Page
Loading...
Need help?
General