Eizo FlexScan S1934 User Manual

29
Chapter 6 Reference
6-2. Connecting Multiple PCs
This product can be connected to multiple PCs and allows you to switch between the connections for
display.
Connection examples
Signal cable
PP200
(option)
Signal cable
FD-C39
(supplied)
DVI-D
connector
Digital
(DVI)
Digital
(DisplayPort)
DisplayPort
connector
D-Sub
connector
Signal cable
MD-C87
(supplied)
Analog Input
(D-Sub)
To PC 1 To PC 2 To PC 3
To PC 4
DVI-D connector
D-Sub mini
15-pin connector
DisplayPort
connector
Note
• The input signal changes each time the operation switch ( ) on the front of the monitor is pressed. When the
signal is switched, the active input port name appears at the top right corner of the screen.
• This product automatically recognizes the connector through which PC signals are input and displays images on
the screen accordingly. For details, see “Auto Input Detection” (page 22).
Attachment procedure
1.
LaytheLCDmonitoronasoftclothspreadoverastableandat
surface with the panel surface facing down.
2.
Remove the stand.
Prepare a screwdriver.
Use the screwdriver to loosen the screws (four) that secure the unit to the stand.
3.
Attach the arm or stand to the monitor.
Secure the monitor to the arm or stand using the screws specied in the User’s Manual of
the arm or stand.

Eizo FlexScan S1934 Specifications

General

Brand	Eizo
Model	FlexScan S1934
Category	Monitor
Language	English