EJEAS MS20 - Mobile Phone Pairing; Bluetooth Reconnection With Mobile Phones; Call Answering

8
This intercom supports connection to mobile phones for playing songs ,making calls, and waking
up voice assistants. Up to 2 mobile phones can be connected at the same time.
After powering on the device, press and hold (approx. 5s)
the <Phone/Power Button> until the red and blue lights
flash alternately and the voice prompts "Phone Pairing".
Red light and blue light flash alternately
The phone searches for the device named "MS20" using
Bluetooth. Click on it to connect.
MS20
Connection
successful
Bluetooth Reconnection With Mobile Phones
Call Answering
When a call comes in,
click on the <Phone/Power Button>
After switching on, it automatically connects
back to the last connected phone Bluetooth.
When there is no connection, click on the <
Phone/Power Button > to reconnect with the
last mobile device that was connected to
Bluetooth.
Current battery level is displayed on the
phone's Bluetooth icon
（Mobile phone HFP connection required）
Blue light double flashes slowly
Mobile Phone Pairing
Mobile Control