EK-Quantum AM5 - Box Contents; Prepare AM4 Water Block for Upgrade

- 4 -
BOX CONTENTS
Allen Key 2.5 mm (1 pc) AM5 Mounting Standoff (4 pcs)
STEP 1
BAC KP L AT E
RUBBER
PREPARING THE AM4 WATER BLOCK FOR UPGRADE
Important! Before starting, make sure to have a clean, flat
surface to work on. It is recommended to put foam or soft
material to lay a motherboard on.
STEP 1
If the EK-Quantum Magnitude AM4 water block is already installed,
unscrew four (4) mounting screws using Allen Key 2.5 mm to detach
it (As shown in the picture). Save the parts for later use.
MOUNTING
SCREW
BAC KP L AT E
MOUNTING
SPRING
MOUNTING
STAN DO FF