Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC
EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
_________________________________________________________________________________________ page 25
MAINTENANCE (“ON” or “OFF”)
Touch the “SELECT” key to confirm the set values.
From OVERVIEW SCREEN
Touch the “STEP” key to select the TIME parameter and touch keys and to set
the desired value. The value is automatically confirmed after 5”.
From PARAMETER SCREEN "TEMPERATURE IN CHAMBER"
After setting the TIME parameter, touch the “SELECT” key: the screen concerning the 3
different TEMPERATURE parameters is displayed (Temperature in cooking chamber/Core
temperature/Delta T). For the operator's convenience a 180°C TEMPERATURE IN COOKING
CHAMBER is already set. To modify the set value use the keys and . Touch the “SELECT”
key to confirm the set values.
From OVERVIEW SCREEN
Touch the “STEP” key to select the TEMPERATURE parameter and touch keys and
to set the desired value. The value is automatically confirmed after 5”.
From PARAMETER SCREEN “% HUMIDITY/STEAM” (optional function)
After setting the value of the parameter “TEMPERATURE IN CHAMBER”, use the “SELECT”
key: the parameter screen “% HUMIDITY/STEAM” is displayed.
Use the keys and to set the desired value. Touch key “SELECT” to confirm the set
value.
From OVERVIEW SCREEN
Touch key “STEP” to select the TIME parameter then touch keys and to set the
desired value. The value is automatically confirmed after 5”. Use the “START/STOP” key
to activate the cooking cycle.
Only for mod. EKF 1664 TC e mod. EKF 2011 TC (wheeled models)
Before starting a cooking cycle ensure the internal glass of the door is positioned “up” (paragraph
4.3.2.1). With open door and without tray trolley in, the display shows the RED SCREEN (warning)
reading “DOOR GLASS UP”. As soon as the tray trolley is inserted the display shows the RED
SCREEN (warning) reading “DOOR OPEN”. After closing the door the display shows the
OVERVIEW SCREEN (BLUE SCREEN) and the cooking cycle may be activated.
4.3.6.2 Cooking cycle with core temperature and temperature in chamber
From "TIME" PARAMETER SCREEN
If the CORE TEMPERATURE is set it is not required to set the TIME parameter.
By using the “STEP” key there is in any case the possibility to choose the options “PAUSE”
and “MAINTENANCE”.
To Next Page
Loading...
