eka EKF 616 TC - Instructions for the Installer

Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC
EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
_________________________________________________________________________________________ page 5
2.1 Technical data plate (example)
The “technical data” plate is located on the side of the appliance.
2.2 Technical features
Models
EKF 616 TC
EKF 664 TC
EKF 711 TC
EKF 1016 TC
EKF 1064 TC
EKF 1111 TC
EKF 1664 TC
EKF 2011 TC
EKF 1064 TC/0/029
EKF 1111 TC/1/029
Overall dimensions:
height
(with feet)
82.5cm
115cm
192cm
115cm
width
93.5cm
93.5cm
98.5cm
93.5cm
depth
93cm
93cm
103cm
93cm
Weight:
98kg
136.5kg
244.5kg
Maximum load per tray: GN1/1 –
600x400mm
4 – 2kg
Total load trays: GN 1/1 –
600x400mm
28 – 12kg
44 – 20kg
80 – 32kg
44 – 20kg
Electrical power:
Convection
resistors
2
kW 10
3
kW 15
5
kW 30
3
kW 15
Maximum electrical power:
kW 10.5
kW 16
kW 30
kW 16
Electrical insulation class:
I
Casing protection degree:
IPX5
Water pressure:
kPa 100 – 200
Power supply voltage:
400V 3N  50/60 Hz
230V 3  50/60 Hz
Power supply cable section:
5G 2.5 (5 x 2.5 mm
2
)
5G 10
(5 x 10 mm
2
)
4G 10
(4 x 10 mm
2
)
Power supply cable type:
H07RN-F
Power supply cable connection:
Type: Y
The noise level of the appliance in operation is less than 70 dB (A).
3. Instructions for the installer
The following instructions are aimed at the skilled installer for them to perform installation,
electrical and water connection operations in the most correct manner and according to the safety
regulations in force in the place of installation of the appliance.
The manufacturer shall not be liable for damage or harm to persons, pets or property arising from
installation errors. Nor are they responsible for any appliance breakage caused by faulty
installation.
CERTIFICATION
SERIAL NUMBER
EKF 1064 TC
5214010500
16 kW
IPX5
400V 3N 50/60 Hz
400V 3N  50/60
Hz
kPa 100 - 200