Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC
EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
_________________________________________________________________________________________ page 31
Important
Every operation must be done within 5”; after this time the overview screen of the cooking cycle is
automatically displayed.
4.3.7.6 “Load” all programs in the “USB pen drive” on the oven
Through the oven's “USB port”, the user is able to “load” into the “CHEF RECIPE BOOK”, all the
programs (recipes) stored in the “USB pen drive” with a single operation.
Plug the “USB pen drive” into the suitable socket.
Use the key to enter the programming menu. Use the “STEP” key to select the icon .
Touch the “SELECT” key to confirm the selection
Press the “STEP” key once only to select all recipes.
Use the “SELECT” key to initiate recipe transfer.
During recipe transfer the screen reading “OPERATION IN PROGRESS” will be displayed and the
number of remaining recipes before completing the transfer.
Warning
During transfer the recipes having the SAME NAME as those transferred from the "USB pen drive"
will be automatically “overwritten” into the “CHEF RECIPE BOOK”.
4.3.7.7 Use programs (recipes)
Tecnoeka has inserted in the oven some recipes drawn up by its chefs, which may be selected and
run by you.
The recipe book, which is accessed with the key , includes 40 cooking programs (non
modifiable) in the “EKA RECIPE BOOK” and the same cooking programs in the “CHEF RECIPE
BOOK”, modifiable.
By referencing these recipe books you are able to execute the recipes from the “EKA RECIPE
BOOK” (see paragraph 4.3.7.7.1) or to run and/or modify the parameters of the cooking cycles
from the “CHEF RECIPE BOOK” (see paragraph 4.3.7.7.2).
4.3.7.7.1 Using programs stored in the “EKA RECIPE BOOK”
To use a program/recipe (see paragraph 15 “RECIPE BOOK”):
Use the key with symbol to bring up the “EKA RECIPE BOOK” screen. Use the “SELECT”
key: the “RECIPE BOOK” screen will be displayed (product type icons).
Use the “STEP” key to select the food type the name of the recipe to be used belongs to. Use
the “SELECT” key to confirm the product type. The “RECIPE SELECTION RECIPE BOOK”
screen is displayed.
Use the “STEP” key to select the name of the recipe to be used. Touch key “SELECT” to
confirm the selection. The overview screen of the cooking cycle with the recipe name will be
displayed. Use the “START/STOP” key to activate the cooking cycle.
To Next Page
Loading...
