ekwb EK-Quantum Kinetic TBE 120 VTX PWM - Page 5

- 8 - - 9 -
2. Installing the EK-Quantum Kinetic TBE 120/160
VTX combo unit directly into the chassis:
50
50
The assembly can be mounted on any flat surface
inside your computer chassis. You must drill 4 (four)
4.2mm holes using the power drill in a 50 x 50mm
square pattern.
Please follow these steps:
- Drill four (4) 4.2 mm holes into the chassis
- Use enclosed M4 x 4 mm screws and PVC washers to
secure the reservoir to the chassis
CAUTION:
Mounting holes pattern is not in a 1:1 scale.