- 2 -
There are many ways to install your EK-Quantum Volume/Kinetic FLT as
it utilizes a standard fan mounting hole pattern with 15mm spacing, the
same as all EK radiators. The mounting holes have standard M4 threads
with maximum engagement of 10mm. Use of longer screws or screws
with incorrect threads such as those intended for fans or radiators may
damage your product!
Before you start using this product please follow these basic
guidelines:
Please carefully read the manual before beginning with the
installation process!
The EK fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber o-ring gaskets.
The use of corrosion inhibiting coolants is always recommended
for any liquid cooling system. EKWB recommends any of the
EK-Cryofuel for worry-free usage.
To Next Page
Loading...
Need help?
General
