ekwb Vector2 - Page 12

- 12 -
STEP 3
M2.5-M3 x 6.6 STANDOFF
STEP 3
Place the M2.5-M3 x 6.6 Standoff in each of the eight (8) mounting
holes of the standoff M3.5-M2.5 x 11.3 (as shown in the image)
and tighten them evenly with the EK-Plug-Out Spludger Tool.
Do not use excessive force!
For this step, you will need:
EK-Plug Out Spludger Tool
Screws must be present in the places marked on the picture.
STEP 2