ELAC DS-A101-G User Manual

8
12. SUB OUT - Using a quality RCA to RCA cable, connect the SUB OUT on the DS-A101-G to
the SUB IN on a powered subwoofer or sub amp. Once the initial sub settings have been
made, the Volume Control will adjust both Speaker and Sub Out levels as a master
control.
13. ETHERNET - Using an Ethertnet cable, connect the ETHERNET port on the DS-A101-G to
local network (LAN).
This input can be selected by pressing on the remote or by tapping the front
panel Source button.
Alternatively, LAN connection can also be setup via WIFI using the app, instead of
ETHERNET cable.
14. PAIR - Push this small button to pair DS-A101-G with Bluetooth devices for audio
streaming.
15. OPTICAL IN - Using a quality digital optical audio cable, connect the Optical OUT on a
source component to the Optical IN on the DS-A101-G. The Dolby logo will appear in
the front panel display when Dolby Digital signals are present. This input can be selected
by pressing Opt on the remote or by tapping the front panel Source button.
Rear Panel Features (cont)

ELAC DS-A101-G Specifications

General

Brand	ELAC
Model	DS-A101-G
Category	Amplifier
Language	English