ELAC DS-A101-G User Manual

9
IR Remote Features
Figure 3
DS-A101-G IR Remote Features
1. POWER - Press to turn unit ON. The ELAC logo will
appear in the front panel display, followed by the
current volume setting and currently selected input.
Press again to turn unit OFF. Front panel display will
turn OFF. Power can also be turned ON/OFF with the
front panel Power button
2. VOLUME/TRANSPORT -
Volume - The Volume controls will adjust the
volume to the speakers, subwoofer, (if used) or
headphones, (if connected).
Press Vol+ to increase volume.
Press Vol - to decrease volume.
Transport - The Transport buttons will control
play/pause, previous track and next track on a
compatible Android or iOS device that is paired to
the DS-A101-G.
Press once to Play a selected track.
Press again to Pause a selected track.
Press to select the previous track.
Press to select the next track.
3. INPUT SELECT - Press these buttons to select audio
source devices connected to the DS-A101-G rear
panel inputs.
Ana 1 - Press to select the device connected to
Line IN.
Ana 2 - Press to select the device connected to
Line 2 IN.
Opt - Press to select the device connected to
Optical IN.
Coax - Press to select the device connected to
Coax IN.
(BLUETOOTH) - Press this button for various
Bluetooth functions. See section: Bluetooth for
additional information.
(STREAMING) - Press this button for various
streaming options.
4. Mute- Press this button to mute the audio.
1
2
3
4

ELAC DS-A101-G Specifications

General

Brand	ELAC
Model	DS-A101-G
Category	Amplifier
Language	English