35
Elcomed settings – Documentation
Symbol
Description Solution
Documentation active
Documentation not active
Documentation not possible
Adjust W&H contra-angle handpiece, connect USB flash
drive, replace faulty USB flash drive, connect USB flash
drive with sufficient memory space
Storage device not recognized
Connect USB flash drive,
replace faulty USB flash drive (the symbol will
disappear in 3 seconds if no action is taken)
Insufficient memory
Connect USB flash drive with sufficient memory space
(the symbol will disappear in 3 seconds
if no action is taken)
Storage device recognized Disappears after 1 second
Saving process active Disappears once documentation is saved
Saving process finished Disappears after 1 second
To Next Page
Loading...