Elcometer 108 User Guide

10 SPARES & ACCESSORIES (continued)
www.elcometer.com
en-13
R
Each gauge is supplied complete with five dolly plugs. Additional
plugs are available to purchase separately. For information on when
and how to use dolly plugs, see Section 9 ‘Using a Dolly Plug’ on
page en-8.
Dolly Plug, Pack of 5 T99911136
A dolly cutter is available which cuts through the coating to isolate the
coating area under the dolly. It should be noted that some coatings will
be damaged by such an operation, which may cause micro-cracks.
Use of a dolly cutter should be agreed before testing starts.
Dolly Cutter T99914009
10.6 DOLLY TOOL
Supplied as standard with each gauge, the dolly tool is used to remove
excess adhesive from the centre of the dolly.
Description Part Number
Dolly Tool T9994586-
Heating tongs are used to soften the adhesive and remove the dolly
from the test surface, see Section 8.2 ‘Cleaning the Dolly’ on page
en-7 for further information.
Description Part Number
10.4 DOLLY PLUGS
Description Part Number
10.5 DOLLY CUTTER
a
10.7 HEATING TONGS
Heating Tongs; US 110V T99923103
Description Part Number
Heating Tongs; EU 220V / UK 240V T99923147
c
Heating Tongs; EU to UK Converter Plug T99923102
c
Supplied with T99923147.
a
The Elcometer 108 is supplied with or without heating tongs depending on the part number ordered.
Heating tongs are also available to purchase separately, see Section 10.7 on page en-13 for details.

Elcometer 108 Specifications

General

Brand	Elcometer
Model	108
Category	Test Equipment
Language	English