CONTENTS
1.0 SAFETY GUIDE 1
1.1 Do Not 1
1.2 Do 2
2.0 INTRODUCTION 3
3.0 EQUIPMENT IDENTIFICATION 3
3.1 Control Panel 3
3.1 Connections and Terminals 4
4.0 DETAILED OPERATION 5
4.1 Test Batteries 5
4.2 Connect Leads 5
4.3 Select Probe 6
4.4 Earth to Substrate 6
4.5 Check the Earth Connection 6
4.6 Set the Test Voltage 7
4.7 Set Alarm Sensitivity 7
4.8 Detecting Holidays and Other Coating Flaws 7
4.9 Moving Work Position and Finishing Work 7
4.10 Static Electricity 8
5.0 TEST VOLTAGE & SENSITIVITY 9
5.1 Dielectric Strength 9
5.2 Determining the Voltage Limits 10
5.2.1 The Lower Limit 10
5.2.2 The Upper Limit 11
5.3 Setting Alarm Sensitivity 11
6.0 PROBE SELECTION 13
To Next Page
Loading...
