25
en
8.2.1 To switch beeper on/off
Selection of beeper on/off is now complete.
1. While the gauge is off, press and hold down
ALRM key.
2. Press ON/OFF key to switch on the gauge.
3. Release ALRM key. The gauge will display
bEEP OFF or bEEP On depending on whether
the beeper is on or off.
4. Repeat steps 1 to 3 to toggle between bEEP
ON and bEEP OFF.
1. Press ON/OFF key to switch on the gauge.
2. Press MODE key to activate features and
settings.
3. Press UP or DOWN arrow keys to scroll to
bEEP. The gauge will display bEEP OFF or
bEEP On depending on whether the beeper is
on or off.
4. Press SEND key to toggle the status of the
beeper on/off.
5. Press MODE key when finished.
Elcometer CG60 Elcometer CG60DL
CG60_CG60DL_TMA_0498_00_01_23225_A6L.fm Page 25 Tuesday, November 22, 2011 12:19 PM
To Next Page
Loading...
