67 FADE 70 SECONDS direct select Sets fadeout to 70 seconds
68 FADE 80 SECONDS direct select Sets fadeout to 80 seconds
69 FADE 90 SECONDS direct select Sets fadeout to 90 seconds
70 FADE 99 SECONDS direct select Sets fadeout to 99 seconds
MIDI Control Change (CC) Table
CC# Function CC Value
Data Range
Notes
Button Presses 1 to 70
Mimic all MIDI PC functions when CC
message of matching value is received
7 LEVEL knob 0 to 127 Adjust loop volume level
26 OVERDUB knob 0 to 127 Adjust overdub feedback level
27 TEMPO knob 0 to 127 Adjust tempo if applicable
110
TEMPO knob
resolution
0 to 1 TM.KN setting: 0 = Coarse, 1 = Fine
112 Fadeout Time setting 0 to 99
0 = Fadeuut disabled, 1 = 1 second
fadeout, 2 = 2 second fadeout, etc.
115 Loop Direct Select 1 to 20 1 = Loop 1, 2 = Loop 2, etc.
116 EXTC setting
Select EXTC setting: 0 = CX.4B, 1 = XT.4B,
117 SWFX setting 0 to 4
Selext SWFX setting: 0 = STOP, 1 = OCT, 2
Notes and Specications
1440 Stereo Looper
t
t
t Current draw: 150mA
t
t Loop time: 24 minutes
t Audio quality: 24-bit, 44.1kHz Sample rate
t
signal is analog through the 1440.
1440 Loop Manager Application System Requirements
t MAC: Operating system must be macOS X Sierra (10.12) or higher.
t Windows: Operating system must be Windows 7 or higher.
- 18 -
To Next Page
Loading...
