1360 Page 16
Electro-Mech Scoreboard Co. • 120 Industrial Parkway • Wrightsville, GA 31096
Phone: (800) 445-7846 • Fax (478) 864-0212 • Email: score@electro-mech.com
Control Console Key Functions
1. GUEST +1 – This key increments the Guest score by 1.
2. GUEST +10 – This key increments the Guest score by 10.
3. HOME +1 – This key increments the Home score by 1.
4. HOME + 10 – This key increments the Home scores by 10.
5. DOWN – This key increments the DOWN indicators.
6. QTR. / INNING – In football / soccer this key increments the QTR. Indicators. In
baseball / softball this key increments the INNING digits by 1.
7. YTG RESET / BALL – In football / soccer this key resets the Yards To Go to 60.
This key must be used to initially display Yards To Go on the scoreboard. In baseball
/ softball this key increments the BALL indicators.
8. YTG –10 / STRIKE – In football / soccer this key decrements the Yards To Go by
10. In baseball / softball this key increments the STRIKE indicators.
9. YTG -1 / OUT – In football / soccer this key decrements the Yards To Go by 1. In
baseball / softball this key increments the OUT indicators.
10. CLOCK ON/OFF – This key toggles the clock on and off. When the clock is on
(counting down), a red LED on the keypad above this key is illuminated. The horn
sounds for two seconds when the game clock reaches 0 seconds.
11. MIN -1 – This key decreases the clock by one minute.
12. SEC +1 – This key increases the clock by one second.
13. SEC -1 – This key decreases the clock by one second.
14. CLOCK RESET – This key is used to cycle the clock between the 15, 30, 60, and 90
minutes settings.
15. NEW GAME – This key can be used to reset all scoreboard functions. Press NEW
GAME and, within two seconds, press CLOCK RESET.
Select the sport that the control console is going to be used in by moving the toggle
switch on the control console backplate to the BASEBALL position for baseball / softball
or the FOOTBALL position for football / soccer. Reset the control console by pressing
NEW GAME and, within two seconds, pressing CLOCK RESET.
You should reset the scoreboard each time that it is turned on. Test out all the functions
to ensure that the scoreboard is operating properly.
SCOREBOARD SHUTDOWN
1. Place the power disconnect for the scoreboard in the OFF position.
2. Unplug the control console power cord.
3. Unplug the 10 ft. extension cable.
4. Store the control console in a dry location. This unit is not waterproof.
Proper scoreboard shutdown will help protect the scoreboard and control console from
power surges and lightning strikes.
To Next Page
Loading...