1360 Page 24
Electro-Mech Scoreboard Co. • 120 Industrial Parkway • Wrightsville, GA 31096
Phone: (800) 445-7846 • Fax (478) 864-0212 • Email: score@electro-mech.com
LED Power Supply Module Replacement
Electrical connections to the LED POWER SUPPLY MODULE LPS5 are made with four
keyed plugs that mate with jacks on the left side of the module. The module is secured
inside the scoreboard with four machine screws.
1. Disconnect the plugs from the jacks on the side of the module.
2. Remove the four screws.
3. Remove the module from the scoreboard.
4. Insert the replacement module in the scoreboard.
5. Secure the module with the four screws.
6. Insert the plugs into the jacks on the side of the module.
To avoid damage to the module, always turn off the power to the scoreboard when
removing or replacing it.
To Next Page
Loading...