1360 Page 3
Electro-Mech Scoreboard Co. • 120 Industrial Parkway • Wrightsville, GA 31096
Phone: (800) 445-7846 • Fax (478) 864-0212 • Email: score@electro-mech.com
SCOREBOARD SPECIFICATIONS
GENERAL: This ETL listed scoreboard includes the scoreboard cabinet, a horn, mounting hardware,
control console, 10 ft. extension cable, and junction box.
DIMENSIONS: 10’ L x 5’ H x 6” D (1360 with a side sponsor panel measures 14’ L x 5’ H x 6” D)
WEIGHT: 180 lbs (1360 with side sponsor panel: 235 lbs)
SCOREBOARD CONSTRUCTION: The outer frame is made from extruded aluminum. Internal
structural parts may be extruded aluminum or formed from aluminum sheet. The face and back are
made from aluminum sheet. The face and masks are finished with enamel paint. Black is the
standard color. The captions are white exterior grade vinyl. Some of the captions are mounted on
reversible metal plates to allow the scoreboard to be changed from football/soccer to
baseball/softball use.
DISPLAY: The 1360 scoreboard displays HOME and GUEST scores to 99, INNINGS to 19, TIME to 90
minutes, BALLS, STRIKES, and OUTS during baseball / softball games. When used for football /
soccer, TO GO replaces INNING, DOWN replaces BALL, QTR. replaces STRIKE.
DIGITS AND INDICATORS: Red light emitting diodes mounted on printed circuit boards form the
digits and indicators. The digits are 18” tall. Circular clusters of light emitting diodes form the 4”
diameter indicators used for BALL / DOWN, STRIKE / QTR., and OUT.
POWER REQUIREMENTS: Scoreboard - 120 VAC, 1.3 A, 60 Hz. Control Console - 120 VAC, 0.5
A, 60 Hz
SCOREBOARD ELECTRONICS: 100% solid state fully enclosed.
CONTROL CONSOLE: The control console features a microprocessor, 15 key sealed membrane keypad,
and an attached 6 foot power cord. The console housing consists of ABS plastic base and top
pieces with a steel back plate.
CONTROL CABLE: The cable has two 22 AWG stranded copper conductors with semi-rigid PVC
insulation. It also has a braided shield and a foil shield. The polyethylene jacket is rated at 300
volts. The cable is direct burial rated and measures approximately ¼” in diameter. This item is
sold separately from the scoreboard.
JUNCTION BOX AND EXTENSION CABLE: A 4 ¼” x 2 ¼” x 2” junction box with a ¼” stereo jack
mounted on the face plate is attached to the control cable at the point of operation. A 10 ft.
extension cable connects the control console to the junction box.
SL-230 / 330 RF MODEM SYSTEM: This accessory can be used in place of control cable and junction
box for this scoreboard. Refer to the SL-230 / 330 RF MODEM INSTALLATION MANUAL for more
information.
WARRANTY: Five year limited warranty.
To Next Page
Loading...